Remak Rockwool Board is thermally efficient, acoustically proficient, semi-rigid mineral wool insulation designed for various applications such as insulating/fire protection for bulkheads, wall and ceiling assemblies, in addition to being suitable for ducts, mufflers, and exhaust stacks.
Remak Rockwool Board is manufactured in 50kg to 150kg per cubic meter densities from mineral wool bonded together with a high temperature binder. Remak Rockwool Board is thermally efficient, acoustically proficient, semi-rigid insulation designed for various applications such as insulating/fire protection for roof, wall and ceiling assemblies, in addition to being suitable for ducts, mufflers, and exhaust stacks.
APPLICATION
It is used in cases where fire insulation and fire rating are required, e.g., between wall top and the bottom of a concrete slab (gap seal), fire insulation of steel structure, air duct, fire proof doors, fire proof wall partitions in buildings and ships, etc. Different fire rating can be achieved depending on the board thickness and the structural element construction. Special Rock Wool fire stop board for lectromechanical works (electric cables, ducts and pipes, wall or floor slab penetration) can be produced to provide the required fire rating.
STORAGE
It must be stored in an area where it is protected against water and physical damage.
MAINTENANCE
Once Remak Rockwool Boards are installed they do not need any maintenance.
ADVANTAGES
- Highest fire rating.
- Euro fire classification: A1
- Dimensionally stable.
- Excellent thermal resistance.
- High sound absorption.
- Non-corrosive.
- Stable physical properties.
- Non-combustible.
- Water repellent.
- Asbestos free.
- Chemically inert.
- Easy handling and installation.
FACING
Normally fire boards are none faced, or it can be faced from one or both sides with special fire rated aluminum facing.
TECHNICAL PROPERTIES
It is faced on one or both sides with reflective vapor barrier material to prevent moisture penetration through the insulation.